@chamberz wrote:
I am aware of the discussion here where the question is asked about integrating (likely proprietary) drone flight log data. I am curious about integrating non-proprietary, pre-planned mission data before it turns into flight log data. Hope that justifies its own thread
![:slight_smile:]( ":slight_smile:")
I am building the path using Litchi's Mission Hub. The interface looks like this:
The exported CSV is zipped and attached. October7_3.csv.zip (1.3 KB), or you can just go directly to my Litchi mission here: https://flylitchi.com/hub?m=pkbbBQYRZYThe parts you can't see in the csv that are probably important:
- The Phantom 4 I am flying has a 95° FOV camera.
- Mission speed is set to 8.1mph
- As far as I can tell, Phantom 4 / Litchi software does linear interpolation on factors that change (lat/long, heading, gimbal pitch, etc.), even if the waypoint is set to POI or Interpolate.
And finally, attached is a geo-located SketchUp model with both a Litchi mission screenshot and my building overlaid on the imported aerial imagery. October7_3site.skp (2.6 MB)
Thoughts anyone?
Related: Drones are flipping cool!
Posts: 1
Participants: 1