@Indjana wrote:
I've a problem here. Render uses only about
% of CPU. (I'm using Vray for SU)
In the result, renders are terrible slow. Anyone have a solution?
Is it settings or vray optimization?My specs:
i7 6800K
GTX 1060 6GB
32 GB RAM
Posts: 2
Participants: 2
@rushang.1992 wrote:
Hi friends, I have Sketchup Pro educator license and i have watched open studio tutorials where they use SketchupPro for building geometry.I have tried to install the same plug in but i cant find one. The legacy studio plug in is different Can anyone help me out with it?
Posts: 2
Participants: 2
@MichaelSiggers wrote:
Good Evening
I've recently been using Skalp for Sketchup and am getting on quite well with it, finding it easy to use.
Just one quick query.
When I've used it to create sections with a standard hatch pattern, (ANSII31, if I remember correctly), the hatch appears to be greyscale, rather than black.
Using the sections I created, I produced the documents in Layout using the saved scenes. When I then created the PDFs, the hatch is not black lines, but grey lines. I set the viewport to Hybrid rendering, as when I tried Vector, the hatch disappeared.
Is this normal and something I should accept, or am I missing something?
Bizarrely enough, when I view the Sketchup file in Sketchup Viewer on the iPad, the hatch lines are black.
Many thanks
Mike
Posts: 7
Participants: 3
@skadbone wrote:
Hi folks, I have downloaded, and hope to use "Curviloft", but I get an error message, "Outdated signature", can someone pleas explain what this means, and how can I go about using this seemly neat plugin,?, thank you
Posts: 4
Participants: 2
@skadbone wrote:
Hi DAN , thanks for your sage advice, but I do have two more questions,so far;)-I have installed curviloft successfully, but can't locate in the toolbar, when I try to "customize it. Also, I downloaded some cool plugins from Pinterest, and again, I open the plugin manager to try to install, but no dice. Theses plugins came in a folder, called, "plugins". Any wisdom is much appreciated. Also, as a newbie in Sketchup, although have used and continue to do so, C4D for over 20 years, still finding my way here, so thanks to all for your unlimited patience, Best, Craig
Posts: 14
Participants: 4
@billymorris30 wrote:
Hello, I have been a frequent user for Sketchup and have never run into any problems until recently. I tried to go into windows -> extensions and sign in/download the STL extension, but each time I try either it get an "Authentication failure, contact the system administrator, reference # 751ace33-b2f9-431d-aac2-44607f9a9079 ". I was wondering if there was a simple fix. I am currently using Sketchup 2016 (64-bit).
Thank you for your time,
William
Posts: 1
Participants: 1
@Toying wrote:
How can I resolve the yellow background image on my rendering.( all the enviroment are yellow)
I am new to VRAY rendering.
Posts: 2
Participants: 2
@shockwave wrote:
Hi, can you help me with Vray rendering. Is there any brightness setting because it renders room too dark.
I chosen Vray:Presets-Camera-Interier - Medium quality, in Sketchup : Window-Shadows- 1 PM but final image seems to be too dark. Any help please?
Posts: 5
Participants: 3
@attar82 wrote:
Hello, does anyone knows the correct workflow to exporting from Sketchup to Unreal Engine 4, without having to go thru software like Blender or 3Ds Max? I am quite new to this and what from I have seen on Youtube is that the materials are not transferred correctly
Posts: 5
Participants: 5
@attar82 wrote:
Hello, does anyone know a good extension to exporting from Sketchup to Unreal Engine 4, without having to go thru software like Blender or 3Ds Max? I am quite new to this and what from I have seen on Youtube is that the materials are not transferred correctly
Posts: 2
Participants: 2
@particlerealities wrote:
I received a SketchUp model file from my client. They had been working with a previous firm to generate their renderings, but for various reason, they have requested that I help them complete the project. The previous firm was generating final renders inside of Sketchup. Is there a way to tell what rendering extension the file is setup to use so I can make the necessary model changes and generate final images that match what the previous firm was producing? I've only modeled in SU. I normally import my model into 3ds Max then render final images with V-Ray, so rendering completely within SU is new to me. Any help is greatly appreciated.
Posts: 4
Participants: 3
@petarthegreat wrote:
The extension works well as designed. However, the circles/curves are drawn with minimal resolution (6 sides or so). That minimal resolution makes it impossible (or extremely hard) to intersect/union/.../subtract between other objects and these screws/nuts).
I wonder if there is a way to increase precision for this extension or to buy one that is better (more professional)?
Posts: 1
Participants: 1
@Herbert wrote:
I bought the one year Instant roof, and i cant seem to make the kind of roof i want to.
Thats the look i want to get, that i drew myself but now im missing the resort of the roof can anyone help me ??
Posts: 9
Participants: 5
@yvssmina wrote:
Hi! I've just started working with SU Podium and whenever i render a picture it comes out completely black? I'm trying to render a room with no windows. I did however add lightning so it should work. Someone help me out!
Posts: 12
Participants: 2
@walterjonathanvdk wrote:
My program has been splatting every time recently and the error page that comes up after sending the report says there is a problem with an extension ( Skalp? ). All the solutions explain how to use the extension warehouse to disable or remove a problem extension. Kind of a catch 22. I need to open the program in order to be able to open the program. ??
Posts: 3
Participants: 2
@tonyfisher wrote:
I wanted to round some edges so installed round corner and LibFredo6 to use. Pretty sure both were correctly installed but when I open round corner I just get a whole load of unreadable mess at the top of my page. I can see that it's a lot of options but it's tiny and unreadable. The round corner part of toolbar seems fine but without the options it's unusable.
Posts: 2
Participants: 2
@spawn2k99 wrote:
Sorry, not sure if I'm using this forum as it's supossed to asking such as beginner questions.
When I use the freehand tool to draw a not closed form and then I use the selection tool and I click in any edge, it selects all the segments I made using freehand tool.
Let's supossed I close the object using a line connecting both points. The program treats the freehand and the independent line as "two objects", I'd like it works as only one, is there any way to do this without making a group?
I know I can use "explode curve" to divide it on segments, I'm looking for the opposite, how to connect all of them.
A second question, how can I record a gif or a video to show something?
Thanks in advance.
Posts: 10
Participants: 7
@Cameron_Modder wrote:
I'm trying to create this piece of ■■■■-pit but I don't know where to start at.
Posts: 8
Participants: 4
@junseok0609 wrote:
I had an error when I want to reinstall my vray for sketchup.
I want to delete, but the error appears.
I failed to delete(for re-install) with this Error. what should I do? Help me!
Posts: 2
Participants: 2
